Steel Plate and Section Weight Calculator (kg and lb)
Choose the shape, enter its size, the length and how many pieces. See the weight per metre and in total, in kilograms, tonnes and pounds, from the steel density the Indian standard IS 1786 uses.
- Total weight (kg)
- –
- Weight per metre
- –
- Total weight (lb)
- –
- Weight per foot
- –
- Total weight (t)
- –
- Cross-sectional area
- –
Assumptions
- Nominal sizes and a uniform cross-section along the length.
- Sharp corners: rolled angles and hollow sections have rounded roots and corners, so real weights differ slightly.
- Steel at the density you enter (7,850 kg/m³ by default, from IS 1786); holes, cuts and coatings are not counted.
Estimate Checked 3 November 2026 IS 1786:2008, clause 7.2.1: steel taken at 0.00785 kg per mm² of cross-section per metre (7,850 kg/m³) All sources
How it is calculated
- Area: plate or flat = width × thickness; round bar = π × d² ÷ 4; square bar = side²
- Tube = π ÷ 4 × (D² − (D − 2t)²); hollow section = B × H − (B − 2t) × (H − 2t); angle = t × (A + B − t)
- Weight per metre (kg/m) = area (mm²) ÷ 1,000,000 × density (kg/m³); with 7,850 that is area × 0.00785
- Total weight = weight per metre × length × number of pieces
Worked example
One steel plate 1,000 mm wide, 10 mm thick and 2 m long.
| You enter | |
|---|---|
| Shape | Plate, sheet or flat bar |
| Size unit | Millimetres (mm) |
| Width, diameter, side or first leg | 1,000 |
| Second side or leg (hollow section, angle) | 50 |
| Thickness or wall | 10 |
| Length of each piece | 2 |
| Length unit | Metres (m) |
| Number of pieces | 1 |
| Steel density | 7,850 kg/m³ |
| You get | |
| Total weight (kg) | 157 kg |
| Weight per metre | 78.5 kg/m |
| Total weight (lb) | 346.13 lb |
| Weight per foot | 52.75 lb/ft |
| Total weight (t) | 0.157 t |
| Cross-sectional area | 10,000 mm² |
At 78.5 kg per metre (52.75 lb per foot), 1 piece 2 m long weighs about 157 kg (346.13 lb) in all.
Questions
Why is my angle a little heavier in the steel table?
Rolled angles have a rounded root between the legs, which adds a little steel, and rounded toes, which take a little away. IS 808 lists 5.68 cm² for L 50 × 50 × 6; sharp corners give 5.64 cm². For exact masses, use the maker's or the standard's table.
Where does 0.00785 come from?
Steel weighs about 7,850 kg per cubic metre. One square millimetre of cross-section over one metre is a millionth of a cubic metre, so it weighs 0.00785 kg. IS 1786 uses that figure for bar masses.
Sources and checks
- IS 1786:2008, clause 7.2.1: steel taken at 0.00785 kg per mm² of cross-section per metre (7,850 kg/m³)
- IS 808:1989 Dimensions for hot rolled steel beam, column, channel and angle sections, Table 5.1 (equal angles: L 60 × 60 × 8 = 8.96 cm², 7.0 kg/m is a test here)
- NIST SP 811 (2008), Appendix B: inch, foot and pound conversion factors
Last checked: 3 November 2026. This tool passes 10 automatic tests before every release. How we check our tools
Cite this page
Steel Plate and Section Weight Calculator (kg and lb). GlanceDesk Compute. Last checked 3 November 2026. https://glancedeskcompute.com/
Your numbers stay on your device unless you share them.
Nominal weights for estimating, ordering and transport. Mill certificates and weighbridge figures are the ones that count when you buy or check steel. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.