Enter a file or backup size and a link speed. See how long it takes to send, with decimal (MB, GB) and binary (MiB, GiB) sizes told apart, and an optional allowance for protocol overhead.
An estimate for planning: the time is the size divided by the speed you type. Real transfers also depend on the far end, congestion, disk speed and the protocols in use; the overhead box lets you allow for part of that.
- Transfer time (s)
- –
- Transfer time (min)
- –
- Transfer time (h)
- –
- Data size (B)
- –
- Data size (bit)
- –
- Speed after overhead
- –
Assumptions
- One byte is 8 bits (NIST).
- The prefixes kB, MB, GB and TB are powers of 10; KiB, MiB, GiB and TiB are powers of 2 (NIST binary prefixes).
- The link runs at the speed you type for the whole transfer, less the overhead you enter.
Estimate Checked 3 November 2026 NIST, Prefixes for binary multiples (kibi, mebi, gibi, tebi; 1 B = 8 bit; MiB and MB examples) All sources
How it is calculated
- Bits = size in bytes × 8
- Bytes: kB = 10³, MB = 10⁶, GB = 10⁹, TB = 10¹²; KiB = 2¹⁰, MiB = 2²⁰, GiB = 2³⁰, TiB = 2⁴⁰
- Speed after overhead = link speed (bit/s) × (1 − overhead % ÷ 100); 1 MB/s = 8,000,000 bit/s
- Time (s) = bits ÷ speed after overhead
Worked example
A 1 GB file over a 100 Mbit/s connection, with no allowance for overhead.
| You enter | |
|---|---|
| Data size | 1 |
| Size unit | Gigabytes (GB, 10⁹ B) |
| Link speed | 100 |
| Speed unit | Megabits per second (Mbit/s) |
| Protocol overhead (your estimate) | 0 % |
| You get | |
| Transfer time (s) | 80 s |
| Transfer time (min) | 1.33 min |
| Transfer time (h) | 0.0222 h |
| Data size (B) | 1,000,000,000 B |
| Data size (bit) | 8,000,000,000 bit |
| Speed after overhead | 100 Mbit/s |
1,000,000,000 bytes is 8,000,000,000 bits. At 100 Mbit/s that takes about 1 min 20 s.
Questions
Why does my 1 TB drive show about 931 GB?
The drive maker counts 1 TB as 10¹² bytes (NIST: tera = 10¹²). Some software divides by 2⁴⁰ and still calls the result GB or TB, though it is really GiB or TiB: 10¹² ÷ 2⁴⁰ ≈ 0.909 TiB, which is about 931 GiB.
What is the difference between Mbit/s and MB/s?
Mbit/s counts megabits; MB/s counts megabytes. One byte is 8 bits, so 100 Mbit/s is 12.5 MB/s.
Sources and checks
- NIST, Prefixes for binary multiples (kibi, mebi, gibi, tebi; 1 B = 8 bit; MiB and MB examples)
- NIST SP 811 (2008), Table 5: SI prefixes, and the note that kilo never means 1,024
Last checked: 3 November 2026. This tool passes 9 automatic tests before every release. How we check our tools
Cite this page
Data Transfer Time Calculator (Download and Upload Time). GlanceDesk Compute. Last checked 3 November 2026. https://glancedeskcompute.com/
Your numbers stay on your device unless you share them.
An estimate for planning and learning, from the speed and overhead you type. It is not a measured or guaranteed transfer time. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.