NewNew: GlanceDesk Compute, checked engineering calculators for civil, electrical and HVAC work. See what comes next.
GlanceDeskCompute

Ask an engineering tool

Try:

Answers come from the same tested tools. Nothing you type leaves your device.

Resistor Colour Code Calculator (4 and 5 Bands)

A gap usually sits before the tolerance band; read from the other end.

The numbers filled in are examples. Type your own.

Not used for a 4-band resistor.

Choose 4 or 5 bands and pick each band's colour, starting from the end with the bands closest together. See the resistance, its tolerance and the lowest and highest values it may have.

Resistance
–
Resistance with prefix
–
Tolerance (±)
–
Lowest value within tolerance
–
Highest value within tolerance
–

Assumptions

  • Bands are read from the end where they sit closest together; the tolerance band is last.
  • Colour meanings as in the Duke PrattWiki table, which follows the international colour code (IEC 60062).
  • Six-band resistors (with a temperature-coefficient band) are not covered.

Checked 3 November 2026 Duke University PrattWiki: Resistor Color Codes (digits, multipliers, tolerances; 4- and 5-band reading) All sources

How it is calculated

  • 4 bands: resistance = (1st digit × 10 + 2nd digit) × multiplier
  • 5 bands: resistance = (1st digit × 100 + 2nd digit × 10 + 3rd digit) × multiplier
  • Digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9
  • Multiplier = 10 to the power of the band's digit (gold × 0.1, silver × 0.01); range = resistance × (1 ± tolerance)

Worked example

The UCF lab appendix example: red, violet, green, gold.

You enter
Number of bands4 bands (2 digits)
1st band (digit)Red (2)
2nd band (digit)Violet (7)
3rd band (digit, 5-band only)Black (0)
Multiplier bandGreen (×100k)
Tolerance bandGold (±5%)
You get
Resistance2,700,000 Ω
Resistance with prefix2.7 MΩ
Tolerance (±)5.00%
Lowest value within tolerance2,565,000 Ω
Highest value within tolerance2,835,000 Ω

These bands read 2.7 MΩ ±5%, so the resistor should measure between 2,565,000 Ω and 2,835,000 Ω.

Questions

Which end do I start from?

From the end where the bands are bunched together. The tolerance band, often gold or silver, usually sits a little apart at the other end; gold and silver are never the first band.

What does tolerance mean?

How far the real value may be from the marked one. A 1 kΩ resistor with a gold band (±5%) may measure anywhere from 950 Ω to 1,050 Ω.

Sources and checks

Last checked: 3 November 2026. This tool passes 8 automatic tests before every release. How we check our tools

Cite this page

Resistor Colour Code Calculator (4 and 5 Bands). GlanceDesk Compute. Last checked 3 November 2026. https://glancedeskcompute.com/resistor-colour-code-calculator/

Found a wrong number? Tell us

Your numbers stay on your device unless you share them.

For learning and quick checks. Colours fade and are easy to misread; measure the resistor with a meter when it matters. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.

Related tools

Missing something? Suggest a tool