NewNew: GlanceDesk Compute, checked engineering calculators for civil, electrical and HVAC work. See what comes next.
GlanceDeskCompute

Ask an engineering tool

Try:

Answers come from the same tested tools. Nothing you type leaves your device.

Water Pump Power Calculator (kW and hp from Flow and Head)

The numbers filled in are examples. Type your own.

The height the water is lifted plus the pipe friction and any delivery pressure, as a height of water. FAO notes the working head is always somewhat more than the vertical lift.
1 for clean water. Heavier liquids need more power in proportion.
%
From the pump curve or a test. The 73% example is the centrifugal pump measured in LSU AgCenter Pub. 3241-J. For a whole system FAO uses an overall efficiency instead, which can be much lower.
Leave blank to skip the daily energy.

Enter the flow, the total head the pump works against and the pump efficiency. See the power given to the water and the shaft power the pump needs, in kilowatts and horsepower, and the energy for a day of pumping.

Pump shaft power (kW)
–
Pump shaft power (hp)
–
Hydraulic power given to the water (kW)
–
Hydraulic power given to the water (hp)
–
Flow
–
Shaft energy per day
–

Assumptions

  • The head you enter is the total working head: lift plus pipe friction and delivery pressure, as a height of the liquid.
  • Steady flow of a clean liquid; one litre of water is taken as one kilogram, scaled by the specific gravity.
  • Shaft power = hydraulic power ÷ pump efficiency. Motor and drive losses are not included.

Estimate Checked 29 October 2026 FAO Irrigation and Drainage Paper 43, Water lifting devices: §2.1.8 Practical power requirements (power = kg/s × m × 9.81 ÷ efficiency; its 4,905 W and 19.6 kWh/day examples are tests here) All sources

How it is calculated

  • Mass flow (kg/s) = flow (L/s) × specific gravity (FAO: 1 litre of water = 1 kg)
  • Hydraulic power (W) = mass flow × 9.81 × total head (m)
  • Shaft power = hydraulic power ÷ pump efficiency
  • US units, same result within about 0.2%: fluid horsepower = head (ft) × flow (gpm) × specific gravity ÷ 3,960 (US DOE)
  • Horsepower = watts ÷ 745.6999; energy per day (kWh) = shaft power (kW) × hours

Worked example

5 litres per second lifted against 10 m of head by a pump of 73% efficiency.

You enter
Flow5
Flow unitLitres per second (L/s)
Total head10
Head unitMetres (m)
Specific gravity of the liquid1
Pump efficiency73 %
You get
Pump shaft power (kW)0.672 kW
Pump shaft power (hp)0.9 hp
Hydraulic power given to the water (kW)0.491 kW
Hydraulic power given to the water (hp)0.66 hp
Flow5 L/s
Shaft energy per day—

Lifting 5 L/s against this head gives the water 0.49 kW (0.66 hp). At 73% pump efficiency the shaft needs about 0.67 kW (0.9 hp); the motor draws more than that because of its own losses.

Questions

What is "total head"?

The height of liquid the pump must push against: the vertical lift, plus the friction in the pipes and fittings, plus any pressure you need at the outlet, expressed as a height of the liquid. FAO points out that the working head is always somewhat more than the static lift.

Why does the motor need more than the shaft power?

The US DOE pumping sourcebook puts it simply: the motor power required is somewhat higher than the fluid power because of motor and pump inefficiencies. This tool takes off the pump's losses; the motor's own losses come on top.

Sources and checks

Last checked: 29 October 2026. This tool passes 9 automatic tests before every release. How we check our tools

Cite this page

Water Pump Power Calculator (kW and hp from Flow and Head). GlanceDesk Compute. Last checked 29 October 2026. https://glancedeskcompute.com/pump-power-calculator/

Found a wrong number? Tell us

Your numbers stay on your device unless you share them.

An estimate for choosing and comparing pumps. Select a pump from its maker's curve at your flow and head, and ask a qualified engineer for anything that must not fail. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.

Related tools

Missing something? Suggest a tool