NewNew: GlanceDesk Compute, checked engineering calculators for civil, electrical and HVAC work. See what comes next.
GlanceDeskCompute

Ask an engineering tool

Try:

Answers come from the same tested tools. Nothing you type leaves your device.

Molarity and Dilution Calculator (C1V1 = C2V2, % m/v)

The numbers filled in are examples. Type your own.

Used when you start from the mass of solute.
mol/L
Used when you start from a solution of known molarity (M = mol/L).
g/mol
From the molar mass calculator, for example 58.44 g/mol for NaCl.
The volume of the whole solution, not of the water added.
Used for both the solution volume and the final volume.
The same unit as the solution volume. Type the solution volume again for no dilution.
mol/L

Start from the solute mass and its molar mass, or from a known concentration, and the solution volume. See the molarity, the moles and grams of solute and the % mass by volume, then dilute: give the final volume or the target concentration.

Molarity
–
Solute (mol)
–
Solute (g)
–
Mass by volume (g per 100 mL)
–
Molarity after dilution
–
Final volume after dilution
–
Solvent to add
–
Mass by volume after dilution (g per 100 mL)
–

Assumptions

  • Volumes are of the whole solution after mixing, as the definition of molarity requires.
  • Diluting adds only solvent, so the moles of solute stay the same (C1V1 = C2V2).
  • Volumes are read at one temperature: liquids expand when warmed, which changes the molarity slightly.

Checked 3 November 2026 OpenStax Chemistry 2e, 3.3 Molarity (M = mol/L and the dilution equation C1V1 = C2V2; Examples 3.16, 3.17, 3.19 and 3.20 are tests) All sources

How it is calculated

  • Moles of solute n = mass (g) ÷ molar mass (g/mol), or n = C1 × V1
  • Molarity C1 = n ÷ V1 (mol/L, V1 in litres)
  • Mass by volume % = solute mass (g) ÷ solution volume (mL) × 100
  • Dilution: C1 × V1 = C2 × V2, so C2 = C1V1 ÷ V2 or V2 = C1V1 ÷ C2; solvent to add = V2 − V1

Worked example

OpenStax Example 3.16: 25.2 g of acetic acid in 0.500 L of vinegar, then made up to 1.00 L.

You enter
Start fromMass of solute dissolved
Solute mass25.2
Mass unitGrams (g)
Molar mass of the solute60.052 g/mol
Solution volume500
Volume unitMillilitres (mL)
For the dilution, you knowThe final volume
Final volume after dilution1,000
You get
Molarity0.839273 mol/L
Solute (mol)0.419636 mol
Solute (g)25.2 g
Mass by volume (g per 100 mL)5.0400%
Molarity after dilution0.419636 mol/L
Final volume after dilution1,000 mL
Solvent to add500 mL
Mass by volume after dilution (g per 100 mL)2.5200%

0.419636 mol of solute in the solution gives 0.8393 mol/L. Made up to 1,000 mL it becomes 0.4196 mol/L.

Questions

Why not just add the solute to 1 L of water?

Molarity counts litres of the finished solution. Dissolve the solute in less solvent, then add solvent up to the final volume, as with a volumetric flask.

What does 5% m/v mean?

5 g of solute in every 100 mL of solution. OpenStax gives 0.9% (m/v) as 0.9 g of solute per 100 mL of solution.

Sources and checks

Last checked: 3 November 2026. This tool passes 9 automatic tests before every release. How we check our tools

Cite this page

Molarity and Dilution Calculator (C1V1 = C2V2, % m/v). GlanceDesk Compute. Last checked 3 November 2026. https://glancedeskcompute.com/solution-concentration-calculator/

Found a wrong number? Tell us

Your numbers stay on your device unless you share them.

For learning and laboratory preparation. It is not for preparing medicines, infusions or doses. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.

Related tools

Missing something? Suggest a tool