NewNew: GlanceDesk Compute, checked engineering calculators for civil, electrical and HVAC work. See what comes next.
GlanceDeskCompute

Ask an engineering tool

Try:

Answers come from the same tested tools. Nothing you type leaves your device.

Ohm's Law and Power Calculator (Volts, Amps, Ohms, Watts)

Fill in just those two boxes below. The other two are worked out and any number in them is ignored.

The numbers filled in are examples. Type your own.

V
A
Ω
W

Choose which two values you know, from voltage, current, resistance and power, and type them in. See the other two from Ohm's law and the power formulas.

Current
–
Voltage
–
Resistance
–
Power
–

Assumptions

  • A resistive load: Ohm's law and these power formulas hold for DC, and for AC with RMS values when the load has no reactance.
  • The resistance stays the same as the current changes (no warming up, as a lamp filament does).
  • All values are positive: a value of 0 has no meaning in these formulas and is refused.

Checked 29 October 2026 Kuphaldt, Lessons in Electric Circuits Vol. I (LibreTexts) 2.4: Calculating Electric Power (Ohm's law and P = IE = I²R = E²/R; its 18 V and 36 V lamp examples are tests here) All sources

How it is calculated

  • Ohm's law: E = I × R, so I = E ÷ R and R = E ÷ I
  • Power: P = I × E = I² × R = E² ÷ R
  • From power and resistance: I = √(P ÷ R), E = √(P × R)
  • From power and voltage: I = P ÷ E, R = E² ÷ P; from power and current: E = P ÷ I, R = P ÷ I²

Worked example

Kuphaldt's example: an 18 V battery and a 3 Ω lamp.

You enter
The two values you knowVoltage and resistance
Voltage18 V
Resistance3 Ω
You get
Current6 A
Voltage18 V
Resistance3 Ω
Power108 W

18 V across 3 Ω drives 6 A, and the resistance turns 108 W into heat (or light).

Questions

Why does doubling the voltage give four times the power?

Doubling the voltage across the same resistance doubles the current, and power is voltage × current, so it goes up 2 × 2 = 4 times. Kuphaldt's example: 18 V across 3 Ω gives 108 W, and 36 V gives 432 W.

Can I use this for mains AC?

Yes for a purely resistive load such as a heater, using RMS volts and amps. Motors, fans and electronics have a power factor; use the kVA, kW and amps calculator for those.

Sources and checks

Last checked: 29 October 2026. This tool passes 10 automatic tests before every release. How we check our tools

Cite this page

Ohm's Law and Power Calculator (Volts, Amps, Ohms, Watts). GlanceDesk Compute. Last checked 29 October 2026. https://glancedeskcompute.com/ohms-law-calculator/

Found a wrong number? Tell us

Your numbers stay on your device unless you share them.

For learning and quick checks. Real components have tolerances, and their resistance changes with temperature. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.

Related tools

Missing something? Suggest a tool