NewNew: GlanceDesk Compute, checked engineering calculators for civil, electrical and HVAC work. See what comes next.
GlanceDeskCompute

Ask an engineering tool

Try:

Answers come from the same tested tools. Nothing you type leaves your device.

Free-Space Path Loss Calculator (ITU-R P.525)

The numbers filled in are examples. Type your own.

Enter the distance between two antennas and the frequency. See the free-space basic transmission loss in dB from Recommendation ITU-R P.525, in kilometres, metres or miles and MHz or GHz.

Free space only: a real path also loses power to the ground, buildings, trees, rain and the air, so it usually loses more. For planning and learning; not a licensed link design or a regulatory compliance check.

Free-space path loss
–
Same loss from the wavelength form, 20 lg(4πd ÷ λ)
–
Wavelength
–
Distance (km)
–
Distance (mi)
–

Assumptions

  • Free space: a perfect vacuum with nothing near the path, between isotropic (0 dBi) antennas.
  • The distance is much greater than the wavelength (far field), as ITU-R P.341 notes.
  • The main answer uses ITU-R P.525 equation (6) with its rounded constant 32.4; equation (5) is shown for comparison.
  • Ground reflection, obstacles, rain, gases and antenna gains are not included.

Checked 29 October 2026 Recommendation ITU-R P.525-5 (11/2024): Calculation of free-space attenuation, §2.3 equations (5) and (6) All sources

How it is calculated

  • Lbf = 32.4 + 20 lg f + 20 lg d (dB), with f in MHz and d in km (ITU-R P.525-5, equation 6)
  • Lbf = 20 lg(4πd ÷ λ) (dB), with d and λ in the same unit (equation 5)
  • Wavelength λ = c ÷ f, with c = 299,792,458 m/s
  • 1 GHz = 1,000 MHz; 1 m = 0.001 km; 1 mi = 1.609344 km

Worked example

A 10 km path at 2.4 GHz.

You enter
Distance between the antennas10
Distance unitKilometres (km)
Frequency2.4
Frequency unitGigahertz (GHz)
You get
Free-space path loss120 dB
Same loss from the wavelength form, 20 lg(4πd ÷ λ)120.05 dB
Wavelength0.12491 m
Distance (km)10 km
Distance (mi)6.2137 mi

Over 10 km (6.214 mi) at a wavelength of 0.1249 m, free space alone takes away 120 dB between two isotropic antennas. Doubling the distance or the frequency adds about 6 dB.

Questions

Why does a higher frequency lose more?

The loss is between isotropic antennas. A receiving isotropic antenna has a smaller effective area at a shorter wavelength, so it captures less of the spreading power. Real antennas of the same physical size have more gain at higher frequencies, which can make up for it.

Why are there two answers?

ITU-R P.525 gives the exact form 20 lg(4πd ÷ λ) and a practical form with the constant rounded to 32.4. They differ by about 0.05 dB. The main answer uses the practical form, as published.

Sources and checks

Last checked: 29 October 2026. This tool passes 6 automatic tests before every release. How we check our tools

Cite this page

Free-Space Path Loss Calculator (ITU-R P.525). GlanceDesk Compute. Last checked 29 October 2026. https://glancedeskcompute.com/free-space-path-loss-calculator/

Found a wrong number? Tell us

Your numbers stay on your device unless you share them.

For planning and learning. Not a licensed link design or a regulatory compliance check; it does not replace a qualified radio engineer or your national radio regulations. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.

Related tools

Missing something? Suggest a tool