Mixer Mass Balance Calculator (Outlet Flow and Mass Fraction)
Enter the mass flow of two or three inlet streams and the mass fraction of one component in each. See the outlet flow and its mass fraction from the steady-state total and component mass balances, in any one flow unit.
- Component in the outlet (mass fraction)
- –
- Outlet flow (same unit as the inlets)
- –
- Component in the outlet (flow, same unit)
- –
- Everything else in the outlet (flow, same unit)
- –
Assumptions
- Steady state: nothing builds up in the mixer, so what goes in comes out.
- No reaction: the component is neither made nor used up in the mixer.
- One outlet stream, and all flows are mass flows in the same unit.
Checked 3 November 2026 MIT 10.213 lecture notes, Mass Balances (steady state, no reaction: rate of input = rate of output) All sources
How it is calculated
- Total balance: outlet flow F = F1 + F2 + F3
- Component balance: F × x = F1 × x1 + F2 × x2 + F3 × x3
- Outlet mass fraction x = (F1x1 + F2x2 + F3x3) ÷ F
Worked example
The KFUPM ChE 201 mixing example: 924 lbm/min of 20% caustic soda solution diluted with 1,386 lbm/min of water.
| You enter | |
|---|---|
| Inlet 1 flow | 924 |
| Component in inlet 1 (mass %) | 20 % |
| Inlet 2 flow | 1,386 |
| Component in inlet 2 (mass %) | 0 % |
| Inlet 3 flow (optional) | 0 |
| Component in inlet 3 (mass %) | 0 % |
| You get | |
| Component in the outlet (mass fraction) | 8.000% |
| Outlet flow (same unit as the inlets) | 2,310 |
| Component in the outlet (flow, same unit) | 184.8 |
| Everything else in the outlet (flow, same unit) | 2,125.2 |
In = out at steady state: the outlet carries 2,310 in total, of which 184.8 is the component, so the outlet is 8% of it by mass.
Questions
Can I use volume flows?
Only if every stream has the same density. Mass is conserved; volume is not always (water and alcohol shrink when mixed), so convert volume flows to mass flows first.
How do I find a feed for a target outlet?
Change the flows until the outlet fraction matches the target. For two streams, F1 ÷ F2 = (x2 − x) ÷ (x − x1).
Sources and checks
- MIT 10.213 lecture notes, Mass Balances (steady state, no reaction: rate of input = rate of output)
- University of Edinburgh (J. W. Ponton), Basic Steady State Material Balances: stream mixing
- KFUPM ChE 201 notes, ch. 4 Material Balances and Applications: balance on a mixing unit (its example is a test)
Last checked: 3 November 2026. This tool passes 7 automatic tests before every release. How we check our tools
Cite this page
Mixer Mass Balance Calculator (Outlet Flow and Mass Fraction). GlanceDesk Compute. Last checked 3 November 2026. https://glancedeskcompute.com/
Your numbers stay on your device unless you share them.
For learning and process planning. It is not a design check: real mixers need proper mixing, and densities change volumes. Results are estimates for planning and learning. They are not a design check and do not replace a qualified engineer or your local building/electrical code.